Jupiter 870 Specifications

Display Wall Controller using Windows NT® or RedHat Linux®


 

  Compact PCI Chassis Overview
    Power supplies
CPU slot
I/O slots
Drive Bay
  Connectors
  
Graphics

    
  Dual, redundant power supplies
One dual-width slot
Seven Compact PCI slots
Removable module with floppy, HDD and CDROM
Front panel connectors for CPU I/O
Rear panel connectors for graphics/video I/O
Up to 28 display channels in one chassis
Up to 124 display channels with four expansion chassis For Linux
and up to 60 display channels under Windows NT 4.0.
  
  CPU Module
   

Processor
Core logic
System Memory
 BIOS
Network I/F
 Serial
Parallel
  USB
Front panel I/O connectors
     

  Intel Pentium III @ 750 MHz -- single or dual CPU
Intel 440BX
128 MB ECC SDRAM standard, 768 MB maximum
Y2K compliant
Ethernet 10BaseT/100BaseTX, RJ45 connector
Two high-speed 16550 ports, RS232C, DB9 
One high-speed port, ECP/EPP, DB25 connector
Two ports
Keyboard, mouse, 2 serial ports, parallel port,
Ethernet, 2 USB
  
  Disk Storage
    Hard disk drive
CDROM
Floppy
  
  18 GB Wide SCSI-II
48x EIDE
3.5", 1.44 MB
  
  Graphics Display Capabilities
   

Display channels
Graphics memory
Resolution
   
   
   
Palette
RAMDAC
Cursor
Output Signals
   Rear panel I/O
Maintainability
  

  Up to 60 channels under NT and 128 under Linux.
4 MB SGRAM per channel
640x480, 800x600, 1024x768, 1280x1024, or
1600x1200
(1600x1200, 64 K colors at 85 Hz)
(1280x1024, 16.8 M colors at 85 Hz)
16.8 million colors
200 MHz
hardware cursor, 64x64 pixels
RGBHV, from an HD15 connector (use HD15 to 5 BNC cable)
Four video inputs (BNC) and four graphics outputs (HD15)
high MTBF, Hot swap    
  
  Video Input and Display
   

Inputs
 Format
Capture format
Display
  

 

Up to 32 composite (or 16 S-video) per chassis
NTSC, PAL or SECAM (may be mixed)
To 640x480 (NTSC), 768x575 (PAL/SECAM)
1 video display window on each display channel or MultiVideo Mode
  

  Input Devices
    Keyboard
Mouse
Cables
  
  104-key PS/2
2-button + wheel, opto-mechanical, PS/2
50-foot extension cables for both keyboard and mouse
  
  Optional Modules
   

RGB Capture
Dual Ethernet
Quad Ethernet
 Aux. video input
 
 

  1 or 2  Capture Engines, 4 inputs (4 optional inputs)
Two 10BaseT/100BaseTX channels, RJ45 connectors
Four 10BaseT/100BaseTX channels, RJ45 connectors
Rear panel card with 8 BNCs for composite video input or 8 4-pin DIN connectors for S-video input
  
  Rack Mount Chassis
    H x W x D
Front panel
Weight
Shipping weight
  
  15.75" x 17.0" x 12.0"
15.75" x 19"
37 pounds
66 pounds (with keyboard, mouse, manual)
  
  Operating Range
    Temperature
Humidity
Altitude
  
  0-40 degrees Centigrade
10-90% non-condensing
up to 10,000 feet
  
  Electrical Requirements - Chassis
    Input voltage
Line frequency
Power consumption
  
  115/230, auto-ranging
50/60 Hz
200/300 watts typical/maximum
  
  Regulatory
    United States
Canada
International

  UL 1950 listed, FCC Class A
cUL C22.2 No. 950
IEC 950 compliant, CE Mark
CB Certificate & report (all member countries)
  
  Software Support
   

OS
Video
Remote access
  

  Windows NT 4.0 Workstation
GUI video control program
Remote keyboard and mouse via LAN
  
   

 

Note: Specifications subject to change without notice. Updated 03-09-2001

 

 

Download Specification Sheets


 


©Copyright 1997-1999, 2000-2001 Jupiter Systems, Inc. All rights reserved.